Something Sweet For Holiday Mornings

Yes, this is the busiest time of year for my Etsy shop and also for my family. Family birthdays begin in October and gather speed through November and December. It does seem like somewhere in the past there was some really poor planning!

Now that the holidays are upon us, it is quite pleasant to slow down for a few days, stop fabricating and shipping, and try some old family recipes.

One of the things I used to bake often is a pecan coffee roll with maple icing. Most of my old recipes ask for lots of butter and this is not an exception, so I don't bake it more than once a year. We all really enjoy it and this was our lucky year! Coffee roll time! You'll find the recipe at the bottom of this post. It's a simple way to instantly raise your cholesterol level, so you have been warned.

Place the Roll on a Cookie Pan and Cut Wedges With Scissors

Turn The Wedges On Their Sides And Top With Whole Pecans

Bake at 350-375 Until Golden Brown. Dribble Maple Flavored Glaze Icing On Them While Hot

Coffee Roll Recipe:
1 package of dry, fast rise yeast
1/3 cup sugar
1 teaspoon salt
3.5 cups flour
3 eggs
1 cube margarine or butter, melted

2/3 cup warm water
Butter, enough to spread
Cinnamon, enough to sprinkle
1/2 box dark brown sugar to sprinkle
1 package whole pecans
1 cup glaze icing flavored with maple (powdered sugar, a little milk, maple flavoring)

Dissolve yeast and sugar in warm water, add the other ingredients and allow to raise in covered bowl.
Punch the dough down and roll out 1/2 inch thick. Spread with butter, sprinkle with brown sugar, cinnamon, and nuts. Roll, place in ring on cookie sheet. Cut with scissors and place in a fan shape. I turn each piece so the layers show on top, then add whole pecans. Bake until golden brown (I think you bake it at 375 until brown) and frost while hot.

A big piece of this is delicious eaten warm, with a glass of milk to offset the sugar.
Remember, I am not responsible for increased weight or cholesterol levels. I will accept responsibility for contented sighs, however.

Soup Weather!

Even in California, it's finally cool enough to plan soup dinners. Today I want to share one of our family favorites--Tortilla Soup. The recipe we use is the tastiest tortilla soup I have ever, well. . . . tasted. It's not a family recipe but is one found by searching the internet. We found it on a website for Pastor Tom's Ministries. Please know that we have absolutely no affiliation with this religious sect, nor are we even sure what it is. We do, however, love this soup!

Our Best Tortilla Soup With Avocado and Sour Cream Garnish

Combine In Blender: Canned Tomatoes, Onion, Garlic, Cilantro, and Sugar. Blend Until Smooth.

Pour Chicken Broth And Chipotle Peppers Into Large Pot.

Add Chicken and Tomato Mixture From Blender. 

 Bring to boil and simmer for twenty minutes. You can control the level of spice by adding or removing chipotle peppers. I suggest you take some out, taste the soup and adjust the amount of peppers. At the finish, remove all of the peppers unless you are really seeking revenge on those who will be eating the soup!

While the soup is simmering, shred some cheese. Peel the avocados and cut into chunks. Crumble some tortilla chips and open the sour cream! You will want to layer these in serving bowls--add chips, top with cheese, garnish with avocado, spoon soup over this and add a dollop of sour cream.

One More Time. The Best Tortilla Soup Ever. It's The Peppers!

 Ingredients:

• 16 ounce can tomatoes
• 1 medium onion, chopped
• 2 cloves garlic
• 4 tablespoons snipped, fresh cilantro
• 1/2 teaspoon sugar
• 8 cups chicken broth
• 1.5 lbs. chicken breast cut up
• 2 or 3 chipotle peppers and a little adobo sauce

• shredded cheese
• avocados cut up
• tortilla chips
• sour cream

Guaranteed to warm you up!

Buyer Beware

I have wanted to write this educational post for a few weeks. Lately, friends have been offering me jewelry pieces that are thought to be sterling.  Even the piece below, which was identified as a knock-off, was still thought to be sterling. It is not. But, you say, it is stamped .925--it must be sterling! The truth is, .925 can be stamped on anything and some countries exert no control or penalties for misuse of quality standards.  One writer stated that their experience in buying beads from one of these countries included being told that beads stamped with .925 were cheaper than those without the stamp proving the demand for fakes is large.

Tiffany Knock Off Sold On Internet

"Silver" Chain Before and After Use of Torch

A link from the fake chain in the top picture was melted with an acetylene torch and it immediately turned a bright brassy color as it melted quickly. The problem with imports is explained in detail in the article linked here:  http://www.silversmithing.com/chinese_sterling.htm

It seems important to understand the misuse of the quality mark since precious metals now sell at record highs. It gives you one more bit of information with which you can educate your friends and customers. I hope this is helpful to you.

Becoming An American

September 27, 2011 was a special day and I want to tell you about it.  It probably isn't connected to metalsmithing but it did affect me and in that way, it was connected.

Today my Swedish son-in-law became an American citizen. He did not just arrive in this country but has been here for 34 years, raised a family, and worked in international sales.  Until just a few years ago, Sweden would not allow dual citizenship and Anders traveled extensively in Europe on his Swedish passport. He began the journey to US citizenship as soon as possible when dual citizenship was an option. Each exit from the US and entry into the US that he had made in the past 34 years required accurate documentation. This documentation process was a daunting undertaking but he kept at it and finally, this year everything was in order.

A Fraction of the 1,232 Candidates For US Citizenship

We arrived at the Paramount Theater where 1,232 about-to-be new United States citizens waited in line to be seated. This was an intricately organized gathering and was critical to the efficiency of everything that followed. The candidates for citizenship were guided into predetermined sections and seated together by country of origin to facilitate the certificate distribution. In the picture above, Anders is in the upper left hand corner, three in from the door, standing between a red jacket and a blue shirt. His big smile makes him easy to identify.

The Wall of the Paramount Theater

Some of you know by now that I like to take pictures of beautiful designs.  So, it makes sense that I would take a picture of this gorgeous ceiling at the Paramount and the wall in the picture above. The colors are true and the designs are mesmerizing. We were not bored while waiting for the ceremony to begin.

The Wall and Ceiling of the Paramount Theater

The interior of the Paramount Theater creates a grand atmosphere for this ceremony and communicates the importance of this moment. The government officials spoke warmly and respectfully to the new citizens. The man who introduced the procedures spoke fluently in the languages of seven countries as he welcomed the candidates. (Swedish was not one of them.) He also had a dry sense of humor with which he peppered his comments. At the end, 1,232 candidates from 104 countries received their certificates of citizenship in a timely, orderly fashion. Over half of them ordered passports in the lobby. All of this finished in a little over an hour renewing my faith, ever so slightly, in government efficiency.

I almost stayed home and worked on some bracelets today but I'm so glad I didn't! I was reminded of my days managing Vocational English As A Second Language Programs in business. The people I interacted with in those classes believed in the promise of America. Many had left everything to come to a better place and participate in the American Dream. Their love for the United States should remind us to stand up for the country we believe in and to vote, vote, vote. These new citizens bring fresh enthusiasm and dedication with them. Let's welcome them.


Thank you, Anders and 1,231 others. We need you here.

New American--One of the Best

Phoenix Pendant-Arising From The Ashes

Wikipedia describes the Phoenix as a bird who: 
 "has a 500 to 1000 year life-cycle, near the end of which it builds itself a nest of twigs that then ignites; both nest and bird burn fiercely and are reduced to ashes, from which a new, young Phoenix or Phoenix egg arises, reborn anew to live again." This pendant is a Phoenix.

Finally,  For The Teal Blue Druzy From New Mexico

I worked diligently on a new type of setting for the base, making a seat out of 12 gauge square fine silver wire and then filing out the edge on the top so the odd shaped stone would fit. At this point, I used too much flame and the base fell apart.

That was the first time it fell apart. I soldered it back together and then I set up prongs around the edges
by pushing them into my new Cotronics brazing board--more about this board in a later post. Again, I used an acetylene torch and some of the prongs fell off. At this point, I walked away for a couple of weeks.

After a brief vacation from the heavy prong setting on a square wire seat, I picked up the pieces and started again. I was beginning to understand this strange, exotic cabochon. First, it is not symmetrical and one side is higher than the other. Second, the bottom is not flat as its beveled edge connects the curved top to the flatter base. It would be hard to set without prongs and without the thick wire seat. The dark bottom of the stone presented another issue. Since the bottom looked more like teal blue polymer than stone, it really needed to be hidden. For this reason, I decided to solder the square wire seat to a sterling backing and make it solid in back. Once this decision was made, the rest of the setting went together easier.

I then split a double half-round sterling wire for the bail and placed it so the tip of the stone would fit just at the bottom of the bail. All that was left was to place the stone and bend the prongs. This was a gift for my daughter as she selected the stone in New Mexico. It looks great on the 18" patterned sterling chain that I finished with a double S hook. So there you have it--a blue teal druzy, shot with titanium and set in a heavy prong, heavy seat setting dangling from an 18" sterling chain. A Phoenix pendant--risen from the flame and destruction to beautify a simple outfit.

Bath To Bench Upcycled Organization Solution

Everyone that purchases a blow dryer--you know the kind--for blow drying hair, has received an additional attachment in the box. One of the more common of these is the diffuser pictured below.  I'm not sure what the diffuser is used for in this day and age but I do know, I hate to throw it out. It is such a well-formed piece of plastic with its little spikes and perfect holes all placed at even intervals.

A Diffuser Attachment Waiting To Be UpCycled

Instead of throwing this blow dryer attachment away, try using it to organize your dremel mandrels, polishing brushes, rubber wheels, and all other dremel bits and pieces! It will also work for your flex shaft attachments. This dryer attachment can be upcycled from bathroom use to workbench use allowing you to tame that workbench clutter!
 

Dremel and Flex Shaft Mandrels, Bits, Wheels, and Brushes Stored in a Diffuser

What do you upcycle for your home studio? Give us some ideas. We all need to reuse and upcycle.

More On Etching

I've had so many pieces in the process stage during the last three weeks that I have forgotten to add to my post on etching. Here is my etched bi-metal piece on a handforged copper neck ring:

Bi-Metal Etching of Mimbres Pottery Shard

Another etching design I have used is a print of New Mexico artist Nan Orr's black and white designs. So far, I've only etched these on copper by printing them first on Press N Peel paper and then transferring the designs to copper with heat from an iron.

Copper Etched Pieces on Fused Fine Silver Chain

Two 1"x1/2" Etched Copper Rectangles

Nan Orr's Sunflower Etched on Copper Square

It is really fun to transfer this artist's designs to copper with PnP and then etch them. If the designs don't fill in when transferred, you can fill them in by hand with a Sharpie fine tip, permanent marker. I love having that ability to fix the design before it goes into the etchant.

Annie at A Spinner Weaver blogspot, has a post about an artist in Illinois, George Colin, who paints in a colorful, primitive style. When I saw the post and his work, I thought how it would look when transferred to copper for an etching. Hmmmmmm. Ya never know what will happen next!